Adhesive Anti-slip Signage Tape, R11, 50 mm

A high quality, long lasting, anti-slip floor marking tape for applications in industrial environments, on smooth and textured floors, indoors and outdoors.

Product description:

• Anti-slip adhesive tape.
• Abrasive R11 anti-slip surface with a high level of adhesion.
• Retro-reflective surface.
• Permanent adhesive.
• Width 50 mm.

Product advantages:

• Highly quality anti-slip signage tape suitable for smooth and textured floors indoors and outdoors (with primer).
• Extremely wear-resistant.
• Withstands pedestrian and industrial vehicle traffic even under permanent load.
• Anti-slip and retro-reflective surface for safe and visible floormarking.
• R11 slip resistance up to an angle of inclination of 19° to 27° according to DIN 51130.
• Can be driven over immediately.
• Perfectly suited for all LEAN management and TQM purposes.

Usage:

• Suitable for use on smooth concrete, EP, PU, MMA coatings, tiles, concrete paving and asphalt.
• Ideal for dry areas.
• For use in businesses, warehouses, factories, logistic hubs, campuses, etc.
• Indoors for aisles, pathways, pedestrain walkways, storage areas, safety areas, loading bays, etc.
• Outdoors for delivery areas, parking spaces, loading docks, walkways, etc.
• Ideal for marking surfaces that require additional slip resistance such as stair steps, crosswalks, vehicle ramps, loading dock edges, etc.
• Warning: It is possible to drive over the tape with floor conveyors. But turning and twisting on the tape with floor conveyors or similar heavy vehicles must be avoided and can lead to the destruction of the tape. 

Technical characteristics:

• Material: 1,3 mm Polyurethan.
• Adhesive: synthetic rubber.
• Temperature resistance: -20°C to +70°C.
• Store in a dry and UV-protected place at 20°C to 30°C.
• Made in Germany.

Application:

• To achieve optimum adhesion, the substrate must be free from release agents such as grease, oil, surfactants, dirt and dust.
• Position the edge of the tape, remove protective liner and unroll while applying even pressure to optimize adhesion.
• Use our pressure roller (art. 197658) for faster and easier application.
• Application temperature: ≥12 °C.
• For all outdoor applications, a primer (art. 197659) must first be applied to ensure  adhesion to the substrate and durability of the signage tape.
• The primer should be applied 20-25 min before applying  the tape.
• 1L primer corresponds to approximately 3 m² of adhesive surface or 2 rolls of tape.